Strata Owners, Renters & Reps: Measure First Garage Access Rules

Yes, in most strata schemes, provided your owners corporation gives written consent and the unit clears bonnet height, ceiling and sprinkler zones. Check your by-laws first, put the request in writing, and choose a freestanding option like the Storagenest Kookaburra that avoids permanent fixing to the floor.

The Short Version

  • Owners must provide written consent and meet specific clearances for bonnet height, ceiling height, and access pathways before installing a freestanding storage unit in a strata parking bay.
  • Proper measurement of bonnet height, ceiling clearance, and access to sprinkler heads or fittings is essential to avoid removal orders and ensure approval.
  • Non-permanent units with adjustable legs, confirmed by manufacturer specs and installer statements, are more likely to gain strata approval.
  • Most disputes stem from inadequate documentation or failure to measure accurately; detailed, factual applications improve chances of approval.
  • Renters can access the Kookaburra storage unit via affordable rental plans, with professional installation taking less than two hours and assistance available for approval processes.

Your owners corporation (or body corporate) decides what happens in the car park, even in spaces you use exclusively. That distinction between "your lot" and "common property with exclusive use rights" trips up plenty of owners, because a parking bay is almost never fully private property the way a bedroom is. Strata by-laws set the rules on parking, and they take priority over anything a real estate agent or a fellow resident tells you informally.

Written consent matters because verbal approval from a strata manager or a neighbour carries no weight if a dispute lands in front of a tribunal later. Most by-laws include a "not unreasonably withheld" clause for reasonable modifications, which means the owners corporation cannot refuse consent just because it prefers an empty car park.

There are, however, lawful grounds for refusal:

  • Interference with a neighbouring car space or that owner's ability to open doors
  • Obstruction of fire sprinkler heads or other safety infrastructure
  • Genuine risk to structural or common property elements
  • Precedent concerns, where approving one unit makes it harder to refuse a poorly designed one later

Before you buy anything, locate your scheme's by-laws (your strata manager or online owners portal usually holds these), then send a written request describing the unit, its dimensions, and how it will be fitted. Industry guidance on car space storage consistently flags that schemes assess freestanding units on safety and access grounds, not just on whether a by-law technically allows storage.

Physical clearances to check before you buy

Bonnet clearance is the number that decides whether an over-bonnet unit fits at all. Measure from the top of your parked car's bonnet to where the underside of the unit would sit, and build in extra room for taller vehicles, roof racks or a future car change. A sedan and an SUV can differ by 20 centimetres or more in bonnet height, so measure with the actual vehicle you park, not an estimate.

Pro Tip: Measure at the highest point of the bonnet, not the average. Bonnets slope, and a unit that clears the front edge can still strike the rear of the bonnet near the windscreen.

Overall headroom matters just as much. Car park ceilings often carry sprinkler heads, conduit or beams that reduce usable height well below what the slab-to-slab measurement suggests.

  • Measure ceiling height directly above the proposed unit location, not just at the bay entrance
  • Check for sprinkler heads, light fittings or cable trays that intrude into that space
  • Confirm door-opening clearance on both sides, including your own car doors and the neighbouring bay
  • Allow extra depth if you regularly fit a roof box, bike rack or racking system

Tribunal decisions have found that even a freestanding, unfixed unit can be ordered removed if it interferes with a neighbour's access or with common property use. Getting these clearances right the first time is cheaper than a removal order.

Installer access, stability and non-permanent fitting

Professional installation for a unit like the Kookaburra typically takes under two hours, which matters when you are booking around a shared car park's access hours or a strata manager's supervision requirements. The installer needs enough room to manoeuvre the unit into the bay, usually via a two-person lift, plus clear floor space free of parked cars on either side while they work.

Non-permanent anchoring is the detail that most often swings a consent decision in your favour. Strata resources note that freestanding units with adjustable legs, rather than units bolted or glued to the slab, are far less likely to be treated as a permanent fixture requiring special resolution.

When you submit your application, include:

  • The manufacturer's spec sheet showing load rating and adjustable leg range
  • A written installer statement confirming the fit is non-permanent and reversible
  • Confirmation of the finish used, since an electrocoated steel finish resists corrosion in coastal or humid car parks better than untreated steel
  • The unit's rated capacity, so the owners corporation can assess floor loading if relevant

How to measure your bay: a step-by-step checklist

Take these measurements with your car parked exactly as it normally sits, engine off, and record everything in centimetres so your application has no ambiguity.

  1. Measure bay width, wall to wall or line to line
  2. Measure bay depth, from the entry line to the rear wall or barrier
  3. Park your car and measure bonnet height at its highest point
  4. Measure the distance from the proposed unit location to the nearest sprinkler head or fitting
  5. Measure the clearance to the adjacent bay's door-swing zone

A sample entry might read: bay width 240cm, bonnet height 112cm, ceiling clearance 218cm, distance to nearest sprinkler head 90cm. Numbers like this, laid out plainly, give a strata committee something concrete to approve rather than a vague description to imagine.

Photograph everything at the same time:

  • A wide shot of the bay with a tape measure visible against the wall or bonnet
  • A close-up of the bonnet with the intended clearance marked
  • A ceiling shot showing the sprinkler head or fitting nearest the unit
  • A shot of the neighbouring door fully open, showing it clears the unit

Making the owners corporation application and handling objections

Attach the full evidence pack in one submission rather than trickling documents through over several emails: the spec sheet, installer statement, annotated photos, your measurement table, and a simple placement diagram. Strata committees move faster when they don't have to chase you for the next piece of paper.

Common objections and how to answer them:

  • "It blocks sprinkler access" — show the measured clearance and offer to relocate the unit slightly if a service technician ever needs closer access
  • "It sets a precedent" — note that approval can be conditional on the specific non-permanent, freestanding design you're proposing
  • "It's a fire or storage-policy risk" — confirm in writing that no flammable items will be stored, if that's your scheme's policy

Tribunal cases show refusals on sprinkler or safety grounds tend to hold up, while refusals based purely on preference often don't. If a committee still refuses despite your evidence meeting every measurable requirement, mediation is usually faster and cheaper than a tribunal reference, and most disputes resolve well before that stage.

What actually gets approvals across the line

Most disputes over car park storage don't come down to whether the by-laws allow it. They come down to whether the owner did the measuring and the paperwork before asking. A written request with real numbers gets a yes far more often than a vague one. If your bonnet clearance or ceiling height sits close to the minimum, book a professional site check rather than guessing. Freestanding units, done properly, are usually approvable.

— Matt

How Storagenest supports your installation and approval

Storagenest builds the Kookaburra specifically to clear the hurdles strata committees care about most: it's freestanding, sits on adjustable legs to suit different bay heights, and never needs bolting to the slab. Its three-point locking steel panels are corrosion-resistant, the frame holds up to 500kg of gear, and the electrocoated finish is built to handle coastal corrosion.

Professional installation takes under two hours, and Storagenest can help with the paperwork side too, including body corporate approval support so you're not drafting a consent request from scratch. If buying outright isn't the right fit yet, renters can access the same unit from $25 per week on a 12 month plan, with delivery and installation from $149 to $199. Ready to check your bay against the numbers in this checklist? Have a look at the Kookaburra's full specifications and run the compatibility check to confirm your fit before you apply.

FAQ

Do I need body corporate approval for a freestanding storage unit?

In most schemes, yes. Even freestanding units can affect common property or neighbour access, and strata by-laws typically require written consent before installation.

What's the minimum bonnet clearance for an over-bonnet unit?

There's no single legal minimum. The safe approach is measuring your own parked car at its highest bonnet point and adding a buffer for a taller vehicle or roof accessories, then confirming that figure against the unit's spec sheet before you order.

Can an owners corporation refuse my storage request?

Yes, but only on reasonable grounds such as sprinkler access, safety, or genuine interference with a neighbour's bay. Tribunal decisions have overturned refusals that weren't backed by a real safety or access issue.

How long does professional installation take?

Installing a unit like the Storagenest Kookaburra typically takes under two hours, including fitting the adjustable legs to your bay's exact height.

Can renters install an over-bonnet storage unit?

Renters can access the Kookaburra through Storagenest's rental plans, from $25 per week on a 12 month term or $29 per week over 6 months, with delivery and installation priced from $149 to $199.