Most over-bonnet units measure around 2350mm wide, 1000mm high and 1000mm deep, giving roughly 2.3m³ of storage. Before buying anything, check one measurement first: the gap between your bonnet top and the ceiling with the car parked normally. If that clearance is tight, the unit won't fit no matter how good the price looks, so measure before you commit and confirm body corporate approval before installation day.
Australian off-street parking bays follow AS/NZS 2890.1, which sets a standard bay at 2.4m wide by 5.4m long. That's the benchmark most apartment complexes are built to, though older buildings and tandem bays often run narrower or shorter, and end bays near columns or walls can lose another 100 to 200mm of usable width.
Over-bonnet storage units are designed to sit inside that footprint without eating into the space your car needs. A common configuration is 2350mm wide by 1000mm high by 1000mm deep, which works out to about 2.3m³ of storage, enough for tools, bikes, seasonal gear and boxes you'd otherwise cram into a hallway cupboard. Some suppliers offer narrower or shallower footprints for tighter bays, typically dropping width to around 2000mm or depth to 800mm, though that reduces cubic capacity accordingly.
The leg footprint matters as much as the overall box size. Units mount on adjustable legs that straddle the bonnet space, and those legs need clear ground contact points that don't intrude into the swing path of your car door or the walkway beside the bay. A unit rated for a standard 2.4m bay usually leaves 300 to 400mm of clearance on each side once the legs are positioned, which is enough to open a door without scraping paint.
If your bay is narrower than standard, a custom or reduced-width unit is worth asking about rather than forcing a standard size into a space it wasn't built for. Compatibility checks before purchase exist for exactly this reason: a unit that's 50mm too wide can turn a straightforward install into a returns' headache.
Grab a tape measure, a torch, and your phone camera before you contact anyone for a quote. A proper measurement takes ten minutes and saves you from ordering a unit that clashes with a support column or a sprinkler pipe you didn't notice.
Photograph everything as you go. A useful checklist for quotes includes:
Send these photos with your measurements to whoever's quoting the job. Installers rely on exactly this kind of detail to confirm fit before a truck turns up, and a free on-site measurement check remains the most reliable way to catch a problem before it's expensive.
Bonnet height varies more than people expect. A hatchback might sit 700mm off the ground at the bonnet, while a ute or an SUV with a roof rack can push well past 900mm, and raised suspension adds even more. Measure your own vehicle's actual bonnet height rather than relying on a spec sheet, because aftermarket wheels and suspension kits change the number.
A bonnet-to-ceiling template, essentially a marked pole or measuring rod held at bonnet height, gives you a fast visual check against the underside of the unit before installation. If you're borrowing a car park or planning to upgrade vehicles later, add a buffer of at least 50 to 100mm above your current bonnet height to avoid a repeat measurement job down the track.
Load ratings matter just as much as clearance. Units rated to hold 500kg distribute that weight across multiple leg points, which matters on suspended concrete decks common in multi-level buildings. Concentrated weight on a single point can stress a slab that wasn't designed for it, so ask any installer how load spreads across the frame.
Roof racks, bull bars, and tow bars all change the practical clearance envelope. Flag these when requesting a quote, and never position a unit where it blocks a doorway swing, a fire exit path, or another resident's line of sight to reversing traffic.
Most owners corporations require written approval before anything goes into a car space, even a freestanding unit with no drilling involved. Skipping this step is the single most common reason storage installations get pulled down after the fact. A VCAT decision from 2022 confirmed that owners corporations can order removal of unauthorised storage structures, and that proper consent, along with clear by-law allocation of who maintains the thing, sits at the centre of any lawful installation.
Start by checking your strata plan. Car spaces are usually registered as utility lots, and the rules governing those lots vary between buildings, so read your specific by-laws rather than assuming your situation matches a neighbour's.
Expect the committee to ask for:
That last point trips up more applications than people expect. If a by-law doesn't explicitly allocate maintenance to the lot owner, the owners corporation can end up responsible for a private storage unit, and that's a fast way to get an application knocked back.
A few negotiation moves improve your odds. Framing the unit as freestanding and removable, rather than a permanent fixture, addresses the biggest concern most committees have about altering common property. Offering a maintenance by-law that puts upkeep squarely on you, plus a written undertaking to relocate the unit if the building ever needs access to that space for servicing, turns a hesitant committee into a cooperative one far more often than a bare request does.
Sprinkler-head clearance is the single biggest reason installation requests get rejected. Storage units sitting directly under a sprinkler head interfere with coverage patterns, and most fire engineers won't sign off on it. Before you measure anything else, look up and note every sprinkler head, pipe run, and conduit within a couple of metres of your bay.
Photograph and log these overhead services the same way you document bay dimensions. If your building has accessible parking bays nearby, those spaces carry additional unobstructed-area rules under AS/NZS 2890.6, and storage shouldn't encroach on the access path even if your own bay isn't the accessible one.
Keep contents sensible too. No flammable liquids, no loose fuel containers, and a lockable unit satisfies most building managers' safety concerns without further debate.
The materials decide how long the unit lasts. All-steel construction with an electrocoated or galvanised finish resists corrosion far better than untreated steel, which matters in coastal air where salt exposure accelerates rust within a couple of years.
Security features are worth scrutinising closely rather than taking on faith. Multi-point locking panels and a robust frame rated to hold real weight, 500kg is a sensible benchmark, separate a unit built for apartment car parks from a repurposed garden shed.
Before booking anyone, check for:
Pro Tip: Ask for a labelled dimension sketch showing your car's outline, the bonnet leading edge, and the proposed unit footprint. Installers and strata committees respond to a clear diagram far better than a page of written measurements.
Hidden pipes above the bonnet line catch people out more than any other surprise. So do ceilings that slope toward a drainage point, which throw off a single clearance measurement taken from the wrong spot, and columns positioned closer to the bay than old strata plans suggest.
Engaging your body corporate early, before you've paid for a unit, avoids wasted quotes and the awkward job of pulling something back out once it's installed. Work through the measurement checklist above, photograph the overhead services, and get committee sign-off in writing.
If you're not confident measuring bonnet clearance yourself, a free on-site measurement removes the guesswork entirely.
— Matt
Storagenest built The Kookaburra specifically to solve the problem this article walks through, fitting inside a standard apartment bay without stealing the room your car needs. It's a freestanding, all-steel unit with adjustable legs that suit varying bay heights, no drilling or permanent fixing required, so the removable framing that strata committees prefer is built in from the start.
The unit holds up to 500kg, carries a corrosion-resistant finish suited to coastal conditions, and comes with a Lifetime Parts Cover. Storagenest confirms compatibility before you order, offers professional installation, and provides an approval request form for your body corporate, so the checklist above isn't something you're left to manage alone. You can buy The Kookaburra outright for $1,749, with delivery and professional installation quoted separately for your location, or rent it on a 12-month plan at $25 a week with a one-off $149 delivery and installation fee, or a 6-month plan at $29 a week with a one-off $199 fee. Run your measurements through the compatibility check to find out whether your bay fits before you commit to anything.
A few documents carry real weight when a body corporate committee is deciding whether to approve your unit.
Attach these alongside your measurements and product spec sheet when you submit to the owners corporation.
Further afield, Comment construire son garage covers garage building permits in France, if you are reading from outside Australia.
A standard off-street bay under AS/NZS 2890.1 measures 2.4m wide by 5.4m long. Older buildings and tandem bays sometimes run narrower, so always measure your own bay rather than assuming it matches the standard.
A 2m-wide bay is tighter than the 2.4m Australian standard and leaves little room for door swing once a car and an over-bonnet unit share the space. Bays that form part of a required access path need at least 3200mm of unobstructed width under livable housing guidance, so check whether that rule applies to your bay before assuming 2m works.
Most over-bonnet units run around 2350mm wide, 1000mm high and 1000mm deep, giving roughly 2.3m³ of storage without crowding a standard bay. The Kookaburra from Storagenest uses adjustable legs to suit varying bay heights, so the same unit adapts across different apartment car parks.
Yes, provided the bonnet-to-ceiling clearance and unit height leave enough gap for your specific vehicle. A ute or an SUV with roof racks needs more clearance than a hatchback, so measure your own bonnet height with the car parked normally before ordering.
Almost always, yes. A 2022 VCAT decision confirmed owners corporations can order removal of storage installed without written consent, so get approval in writing before the unit arrives, not after.